Thermokon Smart rule-based EnOcean repeater 593830
€198,80
Description
APPLICATION
AirConfig tool is mandatory for SRE Repeater!
All settings must be programmed using airConfig SmartACK is not supported
Wireless Repeater which receives telegrams and re-send’s them to enhance and increase the signal distance from the transmitter to the receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between sensor and receiver which absorb the signal to the receiver. It can operate as a Level-1 or Level-2 repeater and selected telegrams can be defined using the airConfig software to identify and select certain telegrams to be repeated. The parameters can be selected for sensor signals only or sensor signals and already repeated signals.
TYPES AVAILABLE
SRE-Repeater Level 1/ Level 2* Radio-Repeater with internal Antenna.
SRE Repeate ext. Antenne Level 1/ Level 2* Radio-Repeater with external Antenna. *(to be configured by airConfig tool)
TECHNICAL DATA
Radio technology EnOcean (IEC 14543-3-10), transmission power <10 mW
Frequency 868 MHz, optional 902 Mhz
Antenna internal, external transmitting- / receiving antenna 2,5 m optional
Data transmission bidirectional
Power supply flex. 15..240 V =/~ (±10%)
Power consumption typ. 1 VA (15..240 V =/~)
Functions Level-1, Level-2, Smart-mode, rule-based, max. 10 rules
Enclosure PA6.6, pure white, cover
PC transparent, with quick lock screws
Protection IP65 according to EN 60529
Connection electrical terminal block, max. 1,5 mm²
Ambient condition -20..+60 °C, max. 85% rH, non-condensing
Weight ca. 110 g
Additional information
Merk |
---|